Keyence EX-V Series Manuel d'utilisateur télécharger pdf (Page 41)

Chapter 3 Use of Common Functions

3.2 Function Setting Flow

This section explains how to set functions "E" through "j" using the key.

3.2.1 Selecting the function using the key

Select the function to be set from functions "E" through "j" and then enter the

desired function number or numeric value.

1. Press the

key for at least 2 seconds.

• The sensor enters the common function selection mode.

• The function parameter of the flashing function code can be set.

2. Press the

key to select the function to be set.

Pressing the

key changes the flashing digit to the right.

3. Press the

or key to enter the function number setting state.

4. Set the function parameter.

➮

For details of each function, see pages 33 to 43.

5. Press the key.

The sensor saves the setting and returns to the measurement state.

6. To set two or more functions, repeat steps 1 through 5 described above.

SET

CALL

HIGH TIM

LOW

FUNC

UTILITY

MODE

CALIB

SET

CALL

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 119 120

Lao 20 Nov 2024 | 23:59:11

Keyence EX-V Series Manuel d'utilisateur Page 41