Keyence GP-M Series Manuel d'utilisateur télécharger pdf (Page 12)

Change the setting value of output 1. The changing of setting values

of output 2 is done by pressing and holding the MODE button.

(Refer to page 15)

Changing the Setting Value of Output 1

Display Pressure Unit/Hold Display

Push briefly

MODE

52

Push briefly

MODE

Switch-on point 1

Select using the  buttons.

Setting range: 1% of F.S. to 100% of F.S.

(Details on page 17)

Switch-off point 1

Select using the  buttons.

Setting range: 0% of F.S. to

(Switch-on point) -1% of F.S.

(Details on page 17)

Finish settings

Return to main

screen

Alternate





T2





Alternate

Press  or  briefly

*3. The detection mode of the Output 1 is

displayed as “(.” when in window mode.

*4. If it is not used for 4 seconds it will return

to the main screen.

*1. The detection mode of the Output 1 is

displayed as “(*” when in window mode.

*2. If it is not used for 4 seconds it will return

to the main screen.

Display Pressure Unit

If the MODE button is pressed briefly on the main screen, the

pressure unit will display.

If it is not used for 2 seconds it will return to the main screen.

Display Peak and Bottom Hold

If the MODE button + the U (V) button are pressed briefly on

the main screen, the peak (bottom) hold value will display.

(“

2A*

” (“

DA*

”) and hold value will blink alternately.)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Keyence GP-M Series Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Keyence GP-M Series