Keyence CA-HX048M Manuel d'utilisateur télécharger pdf

16x Speed 480-k pixels Camera

CA-HX048C/CA-HX048M

Instruction Manual

Checking the Package Contents

This package includes the following items. Make sure that all of the items are

in the package.

 CA-HX048C/CA-HX048M (Camera) . . . . . . . . . . . . . . . . . 1

 Resin mounting bracket (attached to camera) . . . . . . . . . 1

 Instruction Manual (this document)

Safety Precautions

 Symbols

The following symbols are used for the list of precautions to ensure safety and

to prevent personal injury and/or property damage when using the device.

 General precautions

• Verify that this device is operating normally in terms of functionality and

performance before the start of work and before the start of device

operation.

• Take appropriate safety measures to avoid any damage in case of device

failure.

• KEYENCE is unable to guarantee the function or performance of this

camera if it is used in a manner that differs from this camera specifications

contained in this manual or if this camera is modified.

• The functions and performance of this camera may not be satisfactory

depending on the operating conditions or operating environment if it is used

in combination with other devices. Use it with other devices only after

careful consideration.

•

Do not use this camera for protecting the human body.

Tips on Correct Use

 Supported controllers

This camera is dedicated for use with the XG-8000 Series (version 5.4.0000

or later; excluding the XG-8800 and XG-8800L), XG-7000 Series (version

4.3.0000 or later), and CV-X Series (version 3.1.0000 or later) controllers.

 Usage of dedicated cables

Use the dedicated cables to connect the camera unit to the controller.

Straight type

CA-CH3(3M), CA-CH5(5M), CA-CH10(10M)

L-shape type

CA-CH3L(3M), CA-CH5L(5M), CA-CH10L(10M)

Straight high-flex type

CA-CH3R(3M), CA-CH5R(5M), CA-CH10R(10M)

* Cables other than above can not be used.

 Installation

Do not use this camera in the following locations:

 Handling

 Mounting

Be sure that the values are appropriate as specified below or lower when

mounting.

Tightening torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.5 Nm

Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 N

 Precautions on settings

Depending on the photograph conditions (for example, when the camera

sensitivity is increased or the shutter speed is decreased) and the temperature

of the usage environment, point defects may occur and narrow lines may be

displayed on the screen.

This is not a malfunction. These phenomena arise due to the structure of the

camera and the special characteristics of CMOS sensors. If these phenomena

occur, examples of ways that you can rectify the situation include lowering the

usage temperature, lowering the camera sensitivity, and increasing the shutter

speed and ensuring that there is sufficient illumination by using an external light

source. You may also be able to improve the situation by using an illumination

expansion unit such as the CA-DC21E to synchronize the illumination and the

shutter.

General Cautions regarding CE Marking

KEYENCE checked this product's conformance to the EMC Directive with the

simultaneous use of supported controllers. Therefore, see the user's manual

of the supported controller that you are using when using this product in the

EU nations. This is not to guarantee the conformity to the EMC Directive for

the entire mechanical system created by the customer.

Mounting and Adjusting the Lens

 Selecting the lens

The chart shown below indicates the relationship between the image

capturing field of view (the vertical direction of the camera) and the distance

to the object working distance. Refer to the chart to select the appropriate

lens.

 Indications in the chart

•

The mark in the chart indicates the extension length of the Extension

tube. (The Extension tube is installed between the lens and the camera.)

•

The asterisk (*) in the chart indicates the lens model.

CAUTION

It indicates a hazardous situation which, if not avoided, could result

in minor or moderate injury.

NOTICENOTICE

It indicates a situation which, if not avoided, could result in product

damage as well as property damage.

It indicates additional information on proper operation.

CAUTION

• Turn off the power of this camera immediately if one of the

following incidents occurs. If you continue to use the device

while the abnormality persists, fire, electric shock, or

malfunction may result. Contact your KEYENCE office for

repair service.

When liquid such as water, oil, and chemicals or other

foreign materials enter inside the unit

When the strong impact is applied or the housing is damaged

When smoke, foul odor or abnormal noise is emitted from the unit

• Do not dismantle the camera, modify it, or connect it to

anything other than the supported controllers. Doing so may

result in fire, electrical shock, or equipment malfunction.

• Be sure to power off this camera and its accessories, when

you plug/unplug the cable. Otherwise a fire, electrical shock,

burn or malfunction could result.

96M13065

Point

NOTICENOTICE

• Locations where this camera is exposed to direct sunlight

• Locations where the surrounding air temperature exceeds or

drops below the specification range, or where the temperature

changes rapidly

• Locations which are poorly ventilated

• Locations where the relative humidity drops below 35% or

exceeds 85% RH, or where condensation occurs

• Locations where there are corrosive gas or flammable gas

• Locations where there are much dust, sodium, or iron powder

• Locations where water, oil, or chemicals may splash onto this

camera

• Locations where this camera may be directly subjected to

vibration or impact

• Locations where this camera may be affected by radiation

noise or static electricity.

• Keep this unit and cables away from high-voltage cables or

power lines. Otherwise, noise could cause malfunction or

accident.

• The camera is connected to a frame ground. A current

conducts between the power supply ground and the metal

parts and metal connectors of the camera itself and of items

such as the lens connected to the camera. Be sure to install

the camera in an insulated fashion such as by using the

included plastic mounting components. If an electric potential

difference or noise occurs at the installation location while

the camera is installed in an uninsulated fashion, camera

damage or malfunctions may occur.

NOTICENOTICE

• In case of transportation, use the same packaging as when

the unit was delivered to avoid damage.

• If the unit has any dirt on it, wipe it off with a cloth moistened

with a mild detergent, then rub with a dry cloth. Do not rub

with a wet cloth, benzene, thinner, or alcohol. Doing so could

change the color or shape of the unit.

• Do not allow excessive light (sunlight or intense illumination)

to enter into the camera for a long period of time. Doing so

may cause the image capturing surface to be burnt or be

damaged.

The values in the chart are typical values. Adjustment is required

after mounting the lens.

Point

1 2

Résumé du contenu

Page 1 - CA-HX048C/CA-HX048M

16x Speed 480-k pixels CameraCA-HX048C/CA-HX048MInstruction ManualChecking the Package ContentsThis package includes the following items. Make sure th

Page 2 - WARRANTIES AND DISCLAIMERS

Specifications* The 16x speed reading is supported when transferring data to an XG-8000 Series unit with the XG-EC80L/CA-EC80L/CA-EC80HX equipped or w

Modèles reliés CA-HX048C

Commentaires sur ces manuels

Pas de commentaire

Keyence CA-HX048M Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Keyence CA-HX048M. KEYENCE CA-HX048M User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés CA-HX048C

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Keyence CA-HX048M