search

Keyence SJ-F036 Manuel d'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 10
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
7
4-2
Performing Maintenance on the Electrode Needles
When the SJ-F031/036 is used for a long period of time, the electrode needles become dirty due to the
adhesion of dust and dirt.
If the electrode needles are used in a dirty or dusty state, the static elimination performance can no
longer be fully demonstrated, resulting in accidents or malfunction. Be sure to periodically perform
maintenance on the electrode needles.
Performing Maintenance on the Electrode Needles
• Before removing the Electrode Unit, turn the SJ-F031/036 OFF.
• Do not directly touch the electrode needles with your hands. Doing so may
cause personal injury. Pay attention to this when performing maintenance
on the electrode needles.
1 Remove the Electrode Unit.
Unlock the lock switch on the Static
Elimination Blower, and pull out the
Electrode Unit in the direction of the
arrow.
2 Clean the electrode needles.
Clean the electrode needles with a cotton wool
bud moistened with alcohol.
WARNING
STAR
T
/STOP
B
A
L
A
N
C
E
IO
N
FAN
C
ON
D
I
ON
L
E
V
EL
B
A
LAN
C
E
I
O
N
FAN
C
ON
D
I
O
NL
E
V
E
L
S
TAR
T
/STOP
4-2
Performing Maintenance on the Electrode Needles
3 Install the Electrode Unit.
Make sure that the lock switch is
unlocked, and then insert the Electrode
Unit.
Make sure that the Electrode Unit is
slowly inserted all the way, and then lock
the lock switch to fasten the Electrode
Unit in place.
If cleaning the electrode needles does not improve the static elimination
performance, or the ion level alarm indicator frequently blinks, a probable cause is
that the electrode needles have reached the end of their service life. Replace the
Electrode Unit.
An optional Electrode Unit for exchanging (OP-51407) is available.
START
/STOP
START
/STOP
B
AL
A
N
C
E
I
O
N
FAN
CO
N
D
IO
N
L
E
VEL
B
AL
A
NC
E
IO
N
FAN
C
O
ND
I
O
N
L
EVE
L
Note
4-3
Performing Maintenance on the Air Filter
When the blow rate of the static elimination blower has decreased or the air filter has got dirty, perform
maintenance on the air filter on the back panel.
Performing Maintenance on the Air Filter
1 Remove the air filter.
Pull the tab on the bottom of the air filter in the direction of
the arrow to remove the air filter together with the cover.
Be sure to turn off the main power of the Static Elimination Blower before
attempting maintenance. If not, there may be a risk of electric shock or
accidents.
2 Clean the air filter.
Clean the air filter of dust and dirt.
If the dirt is hard to remove, rinse the filter and dry completely
before use.
3 Attach the air filter.
Fit the air filter to the cover and attach them to the back
panel of the Static Elimination Blower.
Do not operate the blower without the air filter attached. This may cause
malfunction.
WARNING
CAUTION
5SPECIFICATIONS
5-1 Timing Charts
■ Ion generation control timing chart
Indicator states when static elimination is OFF
■ Input response timing chart
■ Ion level alarm output timing chart
Normally ON
Normally OFF
Normally ON Forced OFF Normally ON
Normally OFF
Normally ON
Forced OFF
Normally ON
Static elimination
stop input (I/O cable)
ON
OFF
Static elimination
stop input (operation
panel)
ON
OFF
Ion emission state
Unit indicator
Emitting
No
emissions
A
larm output
ON
OFF
Normal static elimination OFF <during static elimination stop input (via terminal)>
The center LED of the monitor lights in red.
Max. 3.5 s Max. 1.5 s
Static elimination
stop input (unit)
ON
OFF
Ion emission
state
Emitting
No
emissions
Power
ON
OFF
Static elimination
stop input
ON
OFF
A
larm indicator
Blinking
OFF
A
larm output
(N.C.)
ON
OFF
Ion emission
Emitting
No
emissions
Ion level
indicator
Max. 6.5 s
Blinking
OFF
Ion level alarm
output (N.O.)
ON
OFF
When the ion level alarm is output,
removing the cause of the alarm can
restore the normal state. One way of
restoring the normal state is to
perform maintenance on the
electrode needles.
For details on electrode needle
maintenance, see "Performing
Maintenance on the Electrode
Needles".
Vue de la page 6
1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire
Produits connexes et manuels pour Éclairage Keyence SJ-F036
Éclairage Keyence SJ-F300 Series Manuel d'utilisateur   (14 pages)
Éclairage Keyence SJ-F100W/100/010 Manuel d'utilisateur   (56 pages)
Éclairage Keyence SJ-M400 Manuel d'utilisateur   (14 pages)
Éclairage Keyence SJ-M200 Manuel d'utilisateur   (16 pages)
Éclairage Keyence SJ-M201 Manuel d'utilisateur   (16 pages)
Éclairage Keyence SJ-M300 Manuel d'utilisateur   (14 pages)
Éclairage Keyence CA-CHX10U Manuel d'utilisateur   (4 pages)
Éclairage Keyence CA-DC21E Manuel d'utilisateur   (2 pages)
Éclairage Keyence CA-HX048M Manuel d'utilisateur   (2 pages)
Éclairage Keyence CA-HX200M Manuel d'utilisateur   (2 pages)
Éclairage Keyence CA-HX500M Manuel d'utilisateur   (2 pages)
Éclairage Keyence XG Series Manuel d'utilisateur   (22 pages)
Éclairage Keyence XG VisionTerminal Manuel d'utilisateur   (58 pages)
Éclairage Keyence XG-8000 Series Manuel d'utilisateur   (12 pages)
Éclairage Keyence XG-8700T Manuel d'utilisateur   (12 pages)
Éclairage Keyence XG-7000 Series Manuel d'utilisateur   (8 pages)
Éclairage Keyence CA-H2100M Manuel d'utilisateur   (2 pages)
Éclairage Keyence CA-U4 Manuel d'utilisateur   (2 pages)
Éclairage Keyence CV-X Series Manuel d'utilisateur   (20 pages)
Éclairage Keyence CV-X Series Manuel d'utilisateur   (24 pages)
  • Mr. Coffee Middle Alber Cannondale Vissani
  • Insignia Décodeurs de télévision Polycom Boîtiers de commutation en série Black & Decker Planeurs de puissance Koss Écouteurs Siemens Téléphones IP
  • Glacier Bay 58008-2001 Whirlpool WED4985EW Two-notes Wall of Sound III Nokia 6820 AEG KR8403021M
  • Asus CP3130 Manuel de l'utilisateur Ricoh 1195L Manuel de l'utilisateur Ge-monogram ZEM200SF Manuel de l'utilisateur Greenlee AT8LK Fiche technique Samsung ME731KR Manuel de l'utilisateur