Keyence DL-CL1 Manuel d'utilisateur Page 35
- Page / 72
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
3-2 Device Maps
3-7
3
Communicating with the FD-MH series
- CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-MH) -
Number [n] denotes the first data memory number assigned to the DL-CL1.
*1 See "Entering an External Input into a Sensor Amplifier" (page 3-17).
*2 See "Reading Current Values (Instantaneous Flow Rate) from Sensor Amplifiers" (page 3-18).
*3 See "Reading/Writing Settings or Status of a Sensor Amplifier" (page 3-21).
See "Issuing a Motion Command to a Sensor Amplifier" (page 3-20).
*4 See "Error information list" (page 3-7).
*5 See "Command response list" (page 3-8).
*6
See "Command Parameter List" (page 3-24).
Error information list
Operating
mode
Device no.
(HEX)
Name
Communication
method
Description Reading range
Small-memory mode 2
Monitor mode 1
RWr[n] + 04
Integration
reset input
response
*1
Stores the integration reset input response of
the sensor amplifi er.
The response is output by assigning sensor
amplifi ers (ID 01 to ID 10) to bits 0 - 9.
0: Input OFF
1: Input ON
RWr[n] + 05
Flow rate hold
reset input
response
*1
Stores the fl ow rate hold reset input response
of the sensor amplifi er.
The response is output by assigning sensor
amplifi ers (ID 01 to ID 10) to bits 0 - 9.
0: Input OFF
1: Input ON
RWr[n] + 06 (Not used) - -
RWr[n] + 07
Current value
property
*2
Used for reading the instantaneous fl ow rate
value.
This property is output by assigning IDs (ID
01 to ID 10) to bits 0 - 9.
The output occurs when the instantaneous
fl ow rate value read from the sensor amplifi er
is nonnumeric: "over" or "invalid."
0: Normal
current value
1: "over" or
"invalid (-----)"
RWr[n]
+08 to 09
(INT32)
Current value:
box 1
*2
Used for reading the instantaneous fl ow rate
value. The instantaneous fl ow rate value of the
sensor amplifi er of the ID number specifi ed
page number (RWw[n] + 08) is output.Data
type: INT32 (LITTLE)
Page 0: ID 01
Page 1: ID 04
Page 2: ID 07
Page 3: ID 10
RWr[n]
+0A to 0B
(INT32)
Current value:
box 2
*2
The instantaneous fl
ow
rate value of the
sensor amplifi er of the ID number specifi ed
page number (RWw[n] + 08) is output.Data
type: INT32 (LITTLE)
Page 0: ID 02
Page 1: ID 05
Page 2: ID 08
Page 3: (Not
used)
RWr[n]
+0C to 0D
(INT32)
Current value:
box 3
*2
The instantaneous fl ow rate value of the
sensor amplifi er of the ID number specifi ed
page number (RWw[n] + 08) is output.
Data type: INT32 (LITTLE)
Page 0: ID 03
Page 1: ID 06
Page 2: ID 09
Page 3: (Not
used)
RWr[n] + 0E
Temperature
hold reset input
response
*1
Stores the temperature hold reset input
response of the sensor amplifi er.
The response is output by assigning sensor
amplifi ers (ID 01 to ID 10) to bits 0 - 9.
0: Input OFF
1: Input ON
RWr[n] + 0F (Not used) - - -
Error Information
(HEX)
*
Description Cause Corrective action
0000 No error - -
0001
0002
0005
Initialization error
Error encountered during
initialization.
Check the number of connected
sensor amplifiers and the
connection to the sensor
amplifiers, and then cycle power.
If the error remain, contact your
nearest sales office.
0003 Model error
There is connected a sensor
amplifier of a model
incompatible with the DL-CL1.
Connect a sensor amplifier of a
compatible model.
- User’s Manual ( 1
- Introduction 2
- Safety Precautions 3
- Equipment Environment 4
- Noise Protection 4
- About Power Supply 4
- UL Certificate 4
- CE Marking 5
- Relevant Manuals 6
- Manual Organization 7
- Chapter 1 Before Using 8
- Chapter 4 Specifications 9
- Chapter 5 Appendix 9
- Terms Used in This Document 10
- Before Using 11
- DL-CL1 Overview 12
- (brown/brown/brown/gold) 13
- 20-30V DC, Class2 14
- Station 15
- Connection and Configuration 17
- Main unit 18
- Sensor amplifier connector 21
- CC-Link compatible 21
- End unit 21
- Shield braid 22
- Approx. 50 mm 22
- Insulating tube 23
- Shield braid twisted together 23
- Twist together the conductors 23
- Approx. 10 mm 23
- Configuring the Data Link 26
- CC-Link master station DL-CL1 30
- Sensor amplifier 30
- Device Maps 32
- 3-2 Device Maps 33
- Error information list 35
- Command response list 36
- Communication Methods 45
- Data category 48
- Data number 48
- Reference 49
- 3-3 Communication Methods 50
- Reading settings or status 50
- Writing settings or status 51
- Command Parameter List 52
- 3-4 Command Parameter List 55
- Specifications 61
- Data Processing Times 63
- Dimensions 64
- Appendix 65
- Troubleshooting 66
- Revision History 70
- June, 2011 Initial release 70
- August, 2011 2nd edition 70
- E 1101-3 71
Produits connexes et manuels pour Capteurs Keyence DL-CL1
Capteurs Keyence DL-CL1 Manuel d'utilisateur
(74 pages)
(74 pages)
Capteurs Keyence IL Series Manuel d'utilisateur
(140 pages)
(140 pages)
Capteurs Keyence LK-H2 Manuel d'utilisateur
(76 pages)
(76 pages)
Capteurs Keyence LK-H1W Manuel d'utilisateur
(84 pages)
(84 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.795 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels